Model: AKC

Touch screen control panel is primary designed for use in operating theatres.

Touch screen control panel informs personnel in operating theatre about non standard situations by color change in appropriate button as well as by sound signal. Also in those situations, thanks to information shown on control panel, leads the personnel to follow detail information and minimize possible damages or avoid to critical situation on the operating theatre. By simple check of shown functions on the control panel is personnel informed all the time, if all shown values /medical gases, medical isolated system, back up source/, are in order.

Intuitive control and monitoring of necessary functions needed for operating theater operation

• clock
• date
• stop watch
• operating theater lighting intensity setting and on/off function
• laminar flow unit lighting intensity setting and on/off function
• main operating light on/off function /optional function/
• secondary operating light on/off function /optional function/
• other additional functions possible for operating light control based on type of the operating light selected /optional function/ - more information on website
• operating light operation on backup source
• operating theatre temperature indication
• operating theatre humidity indication
• pressure of gasses and vacuum indication /optional function
• medical isolated system situation indication
• medical isolated system function test
• ventilation unit status indication /full or partial operation/
• alarms indication – error reports
• alarms history – error reports
• audio alarm function
• function to simulate alarms for personnel training
• possibility to connect to hospital computer system – remote situation control
• possibility to test status and errors through internet
• blue code - /optional function/
• additional function could be add based on the customer requirements

Touch screen control panel system thanks to its simple software modification enable to adjust

• all types of medical gases
• medical isolated system - very important circuits
• main and secondary operating light
• sound for alarm reports
• language
• touch screen panel color solution

Even not trained personnel can not by accidental touching on the control panel screen cause damage or change settings of any function. System is designed to be resistant against those situations.

Model: Q Panel

The configuration of the BASIC PANEL is with tow doors, a top door that opens upwards and a lover door that opens down wads. The panel’s 3cndad size is 1250x 1500 x 200mm. We may consider as standard the following components such Analogue dock, digital stop-watch, negate scope, hands-free telephone, medicinal gases alarm, electrical damn repeaters, negate scope switch, chronometer control, electrical switches and redundant earth switches. The control elements manufactured by Tedisel are made of polycarbonate sheet and membrane push- buttons, and are easily cleaned. Also, this model may incorporate a TFT screen no larger than 21' and a keyboard for medical use. The medicinal gases sockets are installed in a completely Independent compartment on the bottom half of the panel. Hermes is our digital panel, which is used to control the efferent elements of the operating theater aid it offers advantages such as reduced size of the panel, security, connection to pc, etc.

The interior box Is mode of water-repellent DM sheet owe red with polyrey pur-metal in mate dumlnium, Access to me Technical panels may be carried out In two different ways, from inside and from outside the operating theatre In the case of accessing It from the Inside of the operating theater, the technical panel Will be opened with folding doors, In case of accessing from the outside of the operating theatre. It wiII be supplied with a single hinged door located on the rear side, accessible from the septic hall that only covers the X-ray viewer, Mechanized to add control elements Is performed with numerical control machinery.

Model: ORC-8 Touch Screen OR Panel

The surgical facility panel is a product devised to Centralized dl the operating theatre controls in a tech n led panel, including electrical equipment, ground Unit bar connec¬tion and medical gases It Is manufactured to be fitted In operating rooms and made of Carlen a recommended material for these areas due to their aseptic qualities

The surgical facility panel is a product devised to Centralized dl the operating theatre controls in a tech n led panel, including electrical equipment, ground Unit bar connec¬tion and medical gases It Is manufactured to be fitted In operating rooms and made of Carlen a recommended material for these areas due to their aseptic qualities

Model: ORC-8 Touch Screen OR Panel

ORC-8 Operating room control panel is necessary to ensure optimal working conditions in the operating room, that modern ana reliable device designed to create the best possible comfortable environment to both patient and surgical team.

With IP 65 protection standards touch-screen clean easily, Room's measurement of differential pres sure and filter pollution level is a part of ORC-8 board with "smart care" audit. All electrical controls can be done manually via the touch screen, music, air conditioning apparatus can be controlled. Hands-free phone system with digital sound processor provides quality voice communications are possible on the same touch screen. Another feature of the ORC-8 is automation that makes all automation task on its own when the central automation doesn't work, it make all data exchange is it is necessary.

TECHNICAL SPECIFICATIONS:

• Complete micro-processor control
• Front panel is DIN 4301 stainless steel : Graphics TOUCH screen
• Touch panel protection class is IP 65
• Smart Care* warning system
• General lighting control for 3 line
• 100% rate light intensity controller
• Oparation light control
• Negatoscop control
• 100% rate negatoscop light intensity controller
• UV light control
• 1 x Reserve Button
• Macro buttons to entry / exit the operating room
• Operating room is busy dry contact output
• 4-channel selection from music broadcasts
• Philips hi-fi audio amplifier powers 5 Watt r The ability to set music volume
• 4 cm high, 8-digit bright LED display clock and stopwatch (optional 12 digits)
• 10 channels medical gas alarm to panel integrated
• Proportional; temperature, humidity, room pressure differential, filter pollution level measurements
• Values of the temperature and humidity control automation outlets 0 to10V
• 0 to 10 V analogue measuring outputs data about the temperature, humidity, room differential pressure, filter pollution level.
• Monitoring and setting the temprature value; if the set value is exceeded warning audible and visible
• Monitoring and setting the humidity value; if the set value is exceeded warning audible and visible
• Monitoring and setting the room pressure differentials; if the set value is exceeded warning audible and visible
• Monitoring and setting the filter pollution level; if the set value is exceeded warning audible and visible
• Surgery in progress control (On/ Off), flow control
• Damper on / off manual controller
• Anesthetic gas scavenging control
• Electrical heater (automatic) control
• RS485 port for information transfer to automation (protocol implementations are optional)
• 8 pcs analog 0-10 Volt outlet and 8 pcs digital inlet / outlet for information transfer to automation
• A-Class 0 to 10 V sensors for temperature, humidity, proportional room pressure differential, proportional filter pollution (optional)
• integrated to Panel, digital PHILIPS acoustic-controlled hands-free, touch-screen phone.
• Built-in mounting ability
• Manual VAV controller (optional)
• 0-10V VAV control outlet (optional)
• Sliding hinged door system that provides easy servicing

ELECTRICAL SPECIFICATIONS:

256 KB Program memory
Graphical touch LCD screen with the blue fluorescent-lit
24 pcs digital outlets (dry contact relay outlets as 16 pcs 16 amp/240V)
12 pieces of 10-bit analog inlets (0-10V)
8 pieces 10-bit analog outlets (0-10V)
RS232, RS485 data connection
Alarm page shows the alarm status related to the system MECHANICAL

SPECIFICATIONS :

Surface size :600 mm X 410 mm
internal wall : 580 mm X 380 mm
Depth : 95mm

Model: ICONS

ICON Is a new range of surgical facility panels developed by Tedisel to be installed recessed mounted. Are cleared with a solid inferior structure of extruded Are minimum profiles and are the most reliable and avant- garde of market,

 

In the post, panels integrated visualization and control element, Nowadays, X-ray viewers are not a common used device for vi-sualization as it used to be and it is gradually replaced by nigh definition screens. For this reason it makes sense to split this parts of the panel and use control and visualization panel separately to place each one In a proper location the OR.

Produced as ICON Control, the visualization panel is Used to intricate image and/or diagnosing Screen. If neces¬sary the panel can be used as housing for more than one screen developing on projects requirements.

As complementary equipment It Is possible to install a medical use keyboard, which is completely integrated inside the technical panel when it Is closed. Visualization screen & Instilled In the panel ay means of an adjustable metallic support and protected with a safe¬ty glass protected against breakage and reflection. Custom mode depending on screen's size

It is made of extruded aluminum profiles as main interior structure, giving rigidity far its installation. Door opening is performed in 2 steps. The opening of the profiles is done automatically unblock a spring activated with an electromagnet located inside me aluminum structure.

The contain door is manually opened with lifters. This structure acts at same time as a decorative fame for the panel, Doors where mechanisms and control devices are installed are made of Carlen . T re panel comers are closed with A BS plastic Injection comer Joints.

Model: MKP Touch Screen OR Panel

MKP-Touch smart is a 7" color touch screen central control device developed for operation rooms, delivery rooms, intensive care units and other units known as Group 2 rooms. Local temperature and humidity values sent by the automation system can be followed from the screen. Moreover, differential pressure data from the automation system can also be read. Alarm lower and upper limits can be set via the practical menu screen, audio and visual alarms can be go off in excess of such limits. In addition to controlling central ventilation system, the device can also control ceiling lighting fixtures, operation lights, negate scope, ultraviolet light, occupied light and laminar flow lighting. Color screen can be used for medical gas alarm tracking, high and low values can be set for alarms. Besides, the device can control 3-channel radio broadcast enabling you to select channels and volume for internal speaker listening experience. The device has a mounting section for IT-system local alarm monitoring device. Hands-free phone produces high audio quality, but handset can also be used.

On this screen, users can get these informations

• Temperature of the room
• Humid rate of the room
• Gap pressure rate of the room
• Alarm info related to medical gases
• Airconditioning is on/off
• Semi/Full flow info
• Clean/Filthy Hep a filter info
• Actual room zone heater is on/off
• Alarm yes/no info
• Tme and Date info